|
|
DIN Standards |
Standards and Regulations |
|
|
FDG-0389
|
Gaskets and flange facings for pipes lined with soft rubber
Download:
FDG-389-E.doc |
|
|
DIN 2848 |
Flanged steel pipes and flanged steel or cast iron fittings with
lining; PN 10 |
|
|
DIN 2875 |
Steel flanged pipes and flanged fittings lined with soft or hard
rubber; technical delivery conditions |
|
|
DIN 7168 |
General tolerances for linear and angular dimensions and geometrical
tolerances (not to be used for new designs) |
|
|
DIN 7716 |
Rubber products; requirements for storage, cleaning and maintenance |
|
|
DIN 7724 |
Polymeric materials; grouping of polymeric materials based on their
mechanical behaviour |
|
|
DIN 16945 |
Testing of resins, hardeners and accelerators, and catalysed resins |
|
|
DIN 18200 |
Inspection of construction materials, structural members and types
of construction general principles |
|
|
DIN 18820-3 |
Laminates of textile glass-reinforced unsaturated polyester and
phenacrylic resins for load-bearing structural members (GF-UP,
GF-PHA); protective measures for load-bearing laminates |
|
|
DIN 28051 |
Chemical apparatus – Organic coatings and linings on metal
components – Design of metal components
(Replaced by DIN EN 14879-1) |
|
|
DIN 28052-1 |
Chemical apparatus - Surface treatment of concrete components in
process plants using non-metallic materials; terms, selection
criteria
(Replaced by DIN EN 14879-3) |
|
|
DIN 28052-2 |
Chemical apparatus - Surface treatment of concrete components in
process plants using non-metallic materials, requirements on the
substrate
(Replaced by DIN EN 14879-1) |
|
|
DIN 28052-3 |
Chemical apparatus – Surface treatment of concrete components in
process plants using non-metallic materials – Part 3: Organic
coatings
(Replaced by DIN EN 14879-3) |
|
|
DIN 28052-4 |
Chemical apparatus – Surface treatment of concrete components in
process plants using non-metallic materials – Part 4: Coating
(Replaced by DIN EN 14879-5) |
|
|
DIN 28052-5 |
Chemical apparatus – Surface treatment of concrete components in
process plants using non-metallic materials – Part 5: Combined
coatings
(will be replaced by DIN EN 14879-6)
|
|
|
DIN 28052-6 |
Nonmetallic protective coatings and linings for concrete structural
elements in process plants – Part 6: Suitability verification and
tests
(partially replaced by EN 14879-3) |
|
|
DIN 28053 |
Chemical apparatus – Organic coatings and linings on metal
components – Requirements for metals surfaces
(Replaced by DIN EN 14879-1) |
|
|
DIN 28054-1 |
Chemical apparatus – Coating with organic materials for metallic
components – Part 1: Requirements and testing
(Replaced by DIN EN 14879-2) |
|
|
DIN 28054-2 |
Chemical apparatus - Organic coatings on metal components; laminate
coatings
(Replaced by DIN EN 14879-2) |
|
|
DIN 28054-3 |
Chemical apparatus - Organic coatings on metal components; Trowel
applied coatings
(Replaced by DIN EN 14879-2) |
|
|
DIN 28054-4 |
Chemical apparatus – Organic coating on metal components – Part 4:
Spray applied coatings
(Replaced by DIN EN 14879-2) |
|
|
DIN 28054-5 |
Chemical apparatus – Organic coatings on metal components – Part 5:
powder coating
(Replaced by DIN EN 14879-2) |
|
|
DIN 28055-1 |
Chemical apparatus - Lining of organic material for metallic
components; Requirements
(Replaced by DIN EN 14879-4) |
|
|
DIN 28055-2 |
Chemical apparatus - Organic material linings for metallic
components; testing
(Replaced DIN EN 14879-4) |
|
|
DIN 28090-2 |
Static gaskets for flange connections – Part 2: Gaskets made from
sheets; special test procedures for quality assurance |
|
|
DIN 28090-3 |
Static gaskets for flange connections – Part 3: Gaskets made from
sheets; chemical resistance test procedures |
|
|
DIN 28091-1 |
Technical delivery conditions for gasket sheets – Part 1: Gasket
materials; general requirements |
|
|
DIN 28091-2 |
Technical delivery conditions for gasket sheets – Part 2:
Fibre-based gasket materials (FA); requirements and testing |
|
|
DIN 28091-3 |
Technical delivery conditions for gasket sheets – Part 3: PTFE-based
gasket materials (TF); requirements and testing |
|
|
DIN 28091-4 |
Technical delivery conditions for gasket sheets – Part 4: Expanded
graphite-based gasket materials (GR); requirements and testing |
|
|
DIN 51220 |
Materials testing machines – Generals for requirements and for
verification and calibration of materials testing machines |
|
|
DIN 53504 |
Testing of rubber; determination of tensile strength at break,
tensile stress at yield, elongation at break and stress values in a
tensile test |
|
|
DIN 53505 |
Testing of rubber, elastomers and plastics; Shore hardness testing A
and D
|
|
|
DIN 53531-2 |
Determination of the adhesion of rubber to rigid materials using
conical ended cylinders |
|
|
DIN 53541 |
Rubber; determination of crystallisation effects by hardness
measurements |
|
|
DIN 53545 |
Determination of low-temperature behaviour of elastomers; principles
and test methods |
|
|
DIN 53579-1 |
Testing of flexible cellular materials; hardness test on finished
parts; indentation test on shaped parts |
|
|
DIN 53598-1 |
Statistical evaluation at off-hand samples with examples from
testing of rubbers and plastics |
|
|
DIN EN 59 |
Glass reinforced plastics; measurement of hardness by means of a
Barcol Impressor
|
|
|
DIN EN 1081 |
Resilient floor coverings – Determination of the electrical
resistance |
|
|
DIN EN 1708-1 |
Welding - Basic weld joint details in steel - Part 1: Pressurized
components |
|
|
DIN EN 13555 |
Flanges and their joints - Gasket parameters and test procedures
relevant to the design rules for gasketed circular flange
connections |
|
|
DIN EN 14879-1 |
Organic coating systems and linings for protection of industrial
apparatus and plants against corrosion caused by aggressive media —
Part 1: Terminology, design and preparation of substrate |
|
|
DIN EN 14879-2 |
Organic coating systems and linings for protection of industrial
apparatus and plants against corrosion caused by aggressive media —
Part 2: Coatings on metallic components |
|
|
DIN EN 14879-3 |
Organic coating systems and linings for protection of industrial
apparatus and plants against corrosion caused by aggressive media —
Part 3: Coatings on concrete components |
|
|
DIN EN 14879-4 |
Organic coating systems and linings for protection of industrial
apparatus and plants against corrosion caused by aggressive media —
Part 4: Linings on metallic components
|
|
|
DIN EN 14879-5 |
Organic coating systems and linings for protection of industrial
apparatus and plants against corrosion caused by aggressive media —
Part 5: Linings on concrete components
|
|
|
DIN EN 14879-6 |
Organic coating systems and linings for protection of industrial
apparatus and plants against corrosion caused by aggressive media —
Part 6: Combined linings with tile and brick layers
(actually existing as draft) |
|
|
DIN ISO 48 |
Rubber, vulcanized or thermoplastic - Determination of hardness
(hardness between 10 IRHD and 100 IRHD) |
|
|
DIN ISO 813 |
Rubber, vulcanized or thermoplastic - Determination of adhesion to a
rigid substrate - 90° peel method |
|
|
DIN ISO 1629 |
Rubber and lattices; nomenclature |
|
|
DIN ISO 1817 |
Rubber, vulcanized - Determination of the effect of liquids |
|
|
DIN ISO 5725-1 |
Accuracy (trueness and precision) of measurement methods and results
– Part 1: Generals principles and definitions |
|
|
DIN ISO 6133 |
Rubber and plastics - Analysis of multipeak traces obtained in
determination of tear strength and adhesion strength |
|
|
DIN ISO 8130-2 |
Coating powders - Part 2: Determination of density by gas comparison
pyknometer (referee method) |
|
|
DIN ISO 8130-3 |
Coating powders - Part 3: Determination of density by liquid
displacement pyknometer |
|
|
DIN EN ISO 178 |
Plastics – Determination of flexural properties
|
|
|
DIN EN ISO 527-1 |
Plastics – Determination of tensile properties – Part 1: General
principles
|
|
|
DIN EN ISO 527-2 |
Plastics – Determination of tensile properties – Part 2: Test
conditions for moulding and extrusion plastics
|
|
|
DIN EN ISO 527-3 |
Plastics – Determination of tensile properties – Part 3: Test
conditions for films and sheets
|
|
|
DIN EN ISO 1183-1 |
Plastics - Methods for determining the density of non-cellular
plastics - Part 1: Immersion method, liquid pyknometer method and
titration method |
|
|
DIN EN ISO 1183-2 |
Plastics - Methods for determining the density of non-cellular
plastics - Part 2: Density gradient column method |
|
|
DIN EN ISO 1513 |
Paints and varnishes – Examination and preparation of samples for
testing |
|
|
DIN EN ISO 2039-1 |
Plastics – Determination of hardness – Part 1: Ball indentation
method |
|
|
DIN EN ISO 2064 |
Metallic and other non-organic coatings – Definitions and
conventions concerning the measurement of thickness |
|
|
DIN EN ISO 2178 |
Non-magnetic coatings on magnetic substrates – Measurement of
coating thickness – Magnetic method |
|
|
DIN EN ISO 2360 |
Non-conductive coatings on non-magnetic basis metals – Measurement
of coating thickness – Eddy current method |
|
|
DIN EN ISO 2361 |
Electrodeposited nickel coatings on magnetic and non-magnetic
substrates-measurement of coating thickness- Magnetic method |
|
|
DIN EN ISO 2409 |
Paints and varnishes – Gross-cut test |
|
|
DIN EN ISO 2431 |
Paints and varnishes – Determination of flow time by use of flow
cups |
|
|
DIN EN ISO 2808 |
Paints and varnishes - Determination of film thickness |
|
|
DIN EN ISO 2811-1 |
Paints and varnishes - Determination of density - Part 1: Pyknometer
method |
|
|
DIN EN ISO 2811-2 |
Paints and varnishes - Determination of density - Part 2: Immersed
body (plummet) method |
|
|
DIN EN ISO 2811-3 |
Paints and varnishes - Determination of density - Part 3:
Oscillation method |
|
|
DIN EN ISO 3543 |
Metallic and non-metallic coatings – Measurement of thickness – Beta
backscatter method |
|
|
DIN EN ISO 3882 |
Metallic and other non-organic coatings – Review of methods of
measurement of thickness |
|
|
DIN EN ISO 4624 |
Paints and varnishes; pull-off test for adhesion |
|
|
DIN EN ISO 4625-1 |
Binders for paints and varnishes; determination of softening point;
ring and ball |
|
|
DIN EN ISO 7500-1 |
Metallic materials - Verification of static uniaxial testing
machines - Part 1: Tension/compression testing machines -
Verification and calibration of the force-measuring system |
|
|
DIN EN ISO 7500-1 Beiblatt 1 |
Metallic materials - Verification of static uniaxial testing
machines - Part 1: Tension/compression testing machines;
verification and calibration of the force-measuring system; general
for requirements, verification and calibration of tension,
compression and flexion testing machines
|
|
|
DIN EN ISO 8503-1 |
Preparation of steel substrates before application of paints and
related products; surface roughness characteristics of blast-cleaned
steel substrates; Part 1: Specifications and definitions for ISO
surface profile comparators for the assessment of abrasive
blast-cleaned surfaces |
|
|
DIN EN ISO 8503-2 |
Preparation of steel substrates before application of paints and
related products; surface roughness characteristics of blast-cleaned
steel substrates; Part 2: Method for the grading of surface profile
of abrasive blast-cleaned steel; comparator procedure |
|
|
DIN EN ISO 11126-3 |
Preparation of steel substrates before application of paints and
related products – Specifications for non-metallic blast-cleaning
abrasives – Part 3: Copper refinery slag |
|
|
DIN EN ISO 11126-4 |
Preparation of steel substrates before application of paints and
related products – Specifications for non-metallic blast-Cleaning
abrasives – Part 4: Coal furnace slag |
|
|
DIN EN ISO 12944-4 |
Paints and varnishes – Corrosion protection of steel structures by
protective paint systems – Part 4: Types of surface and surface
preparation |
|
|
DIN EN ISO 15528 |
Paints, varnishes and raw materials for paints and varnishes -
Sampling |
